3 Operating
3.2 Switching off and
retracting the power
cable
2
Fig.13
3.3 Setting aside and stor-
age
1
Fig.14
1
Fig.15
1. Switch off the cylinder vacuum cleaner using the on/off
switch (Fig. 13/1) and pull the plug out of the socket.
2. Keep the plug in your hand.
1
The power cable can whip around when being pulled in,
it can also trip you or somebody else up or knock down
objects.
3. Press the cable retract button (Fig. 13/2) to pull in the
power cable.
When setting the appliance aside or during work
breaks, you can hook the parking hook (Fig. 14/1) for the
floor nozzle into the parking hook mount (Fig. 14/2). Before-
hand, you must lower the telescopic tube completely.
Before you leave the workplace, switch off the appliance
and remove the mains plug.
For storage, you can hook the stow-away hook
2
(Fig. 15/1) of the telescopic tube into the stow-away hook
mount (Fig. 15/2) below on the cylinder vacuum cleaner.
2
Never position the appliance directly against heat
sources (e. g. heating, oven). Avoid direct sunlight. Heat
can damage the appliance.
If you want to store the appliance for a longer period of
time, empty the dust container and clean it as well as the
filters. Always store the appliance in a cool and dry place.
WARNING:
WARNING:
ATTENTION:
25