NSK DynaLED Manuel D'opération page 11

5-4 Lubrication
Lubricate by PANA SPRAY Plus
M500LG M4/B2, M600LG M4/B2
1) Mount the Arrow Head Spray Nozzle into the Spray Port.(Fig.7)
2) Remove the Bur from the handpiece.
3) Insert the Arrow Head Spray Nozzle in the drive Air Tube of the
handpiece and spray for approximately 2-3 seconds.
M500LG QD, M600LG QD
1) Mount the Spray Nozzle into the Spray Port.(Fig.8)
2) Remove the bur from the handpiece.
3) Insert the Spray Nozzle in rear of the handpiece and spray for approximately 2-3 seconds.
10
Drive Air Tube
Arrow Head Spray Nozzle
Handpiece
MidWest Bordent
4 hole 2 hole
Handpiece
PANA SPRAY plus/PANA SPRAY
Fig. 7
Spray Nozzle
PANA SPRAY plus/PANA SPRAY
Fig. 8