NSK DynaLED Manuel D'opération page 10

5-2 Cleaning (Glass Rod)
Wipe clean the Cellular Glass Optic Rod entry point and exit point with an alcohol-immersed cotton swab. Remove all debris and oil.(Fig.6)
CAUTION
Do not use a pointed tool or sharp edged to clean the Cellular Glass Optic Rod. They may damage the mirror finish and reduce the light
transmission efficiency. If Cellular Glass Optic Rod end has become damaged, return it to dealer for repair.
5-3 Cleaning
This handpiece can be washed via Thermo Disinfector.
Scrub dirt and debris from the handpiece, and wipe clean with alcohol-immersed cotton swab or cloth. Do not
use a wire brush.
* Refer the manual of Thermo-Disinfector for performing it.
Cotton Swab
Glass Rod Optic Glass Rod Optic
Fig. 6
9