Husqvarna P 520DX Manuel D'utilisation page 6

Lift lever for hydraulic lift of the cutting
deck
The lift lever for hydraulic lift is used to lift and lower the
cutting deck. The hydraulic lift uses hydraulic pressure
and the engine must be started for the lift to operate.
In mow position, the cutting deck moves in level with the
ground.
• Position (A) moves the cutting deck to the mow
position.
• Position (B) lowers the lift arms.
• Neutral position (C).
• Position (D) moves the cutting deck to transport
position.
B
A
WARNING:
always be lifted and lowered. The hydraulic
force can cause serious injury.
6
D
C
The cutting deck can
Function button for hydraulic
accessories
The function button is adjacent to the lift lever for
hydraulic accessories.
The function button operates differently for different
accessories. Refer to the operator's manual of the
accessory.
Cutting deck
The cutting decks for this product are Combi cutting
®
decks with BioClip . BioClip
fertilizer. The Combi cutting decks can also be used
®
without BioClip . Without BioClip
to the rear.
®
cuts the grass into
®
the grass is ejected
1593 - 005 - 25.10.2021