Husqvarna P 520DX Manuel D'utilisation page 39

To clean and replace the inlet filter on
the cabin heat
1. Loosen the 2 knobs on the fan system cover and
remove the cover.
Electrical system overview
2
1
17
16
1. Display
2. Function button for hydraulic accessories (accessory
for P 520DX)
3. PTO button
4. Ignition key
5. Headlight indicator
6. Power switch for the power outlet
7. USB outlets
8. Control box
1593 - 005 - 25.10.2021
7
6
5
4
3
2. Pull out the filter holder.
3. Lift out the inlet filter.
4. Carefully clean the inlet filter with a brush.
5. If the inlet filter does not become clean, replace it.
6. Put the inlet filter into the filter holder.
7. Attach the filter holder and tighten the knobs.
8
11
10
9
9. Mower control module
10. Relay
11. Power outlet, 12 V
12. Relay
13. Main switch
14. Battery
15. Fuse box
16. AUX power outlet, 12 V (accessory for P 520DX)
17. Headlights
12 13 14
15
39