Husqvarna P 520DX Manuel D'utilisation page 33

2. Open the engine cover rearward.
Note:
To remove the engine cover fully, remove
the bolts by the hinges.
To remove the service lid
1. Turn the 2 screws ¼ turn counterclockwise to open
them.
2. Pull the service lid rearward to release it from the
hooks.
To remove the cover of the control box
1. Turn the 3 screws ¼ turn counterclockwise and
remove the cover.
1593 - 005 - 25.10.2021
To remove the right side cover
1. Remove the 5 screws and remove the side cover.
To remove the service hatch
1. Turn the 2 screws ¼ turn and lift off the service
hatch.
To remove the cover plate
1. Remove the 2 screws and remove the cover plate.
33