Connection To Waterworks - Bartscher 900 Serie Manuel D'instructions

2.2.2. CONNECTION TO WATERWORKS

 Water inlet pressure must be between 50 and 300 kPa, otherwise install a pressure
regulator on the line before the appliance.
 Install a cut-off valve for each supply on the line before the appliance.
 Make connections according to regulations currently in force.
 Water connections to 10mm. are fitted in the lower part on the left-hand side of the
appliance.
Instruction manual for installation, maintenance and use
Electric tilting cooker BM.E080-200
- GB - 11 di 35
Page