Installation - Bartscher 900 Serie Manuel D'instructions

 Remove all the packaging and check that the appliance is in perfect conditions. In case
of visible damage, do not connect the appliance and notify the sales point immediately.
 Remove the PVC protection from the panels.
 Dispose of packaging according to regulations. Generally material is divided according
to composition and should be delivered to the waste disposal service.
 There are no special instructions regarding distances from other appliances or walls,
however it is advisable to maintain a sufficient distance to allow any servicing
operations to be performed. In the event the appliance should be installed in direct
contact with inflammable walls, it is advisable to fit a suitable heat insulation.
 The appliance must stand level. Small differences in level can be eliminated by
screwing or unscrewing the adjustable feet: A significantly uneven or sloping stance
can affect the operation of the appliance adversely.
Warning! : Only qualified technicians must perform the installation, maintenance
and test of the appliance.
Warning! : Before connecting any parts of the appliance to supplies, make sure
that the latter is equivalent the requirements stated in the technical data
plate, if the appliance has been designed for these supplies.
Instruction manual for installation, maintenance and use
Electric tilting cooker BM.E080-200
2.1. POSTIONING

2.2. INSTALLATION

- GB - 9 di 35
Page