Checchi & Magli WOLF COMPACT Manuel D'utilisation Et D'entretien page 70

Replacing the planting unit chain
UN41 0125LF
Proceed as outlined below.
1) Unscrew the nuts (A).
2) Remove the casing (B).
3) Remove the joining link (C).
4) Remove the chain (D).
Replacing the brushes
B
UN41 0126LF
Proceed as outlined below.
1) Unscrew the screws (A).
2) Remove the brushes (B).
Scrapping the work vehicle
The scrapping operations must be handled by special-
ised personnel with suitable skills for the job.
The components removed must be sorted according to
English language
INFORMATION CONCERNING REPLACEMENTS
A
5) Fit the new chain on the pinions and on the chain
tensioner (E).
6) Fit the joining link (C).
7) Fit the casing (B) and tighten the nuts (A).
3) Fit the new brushes and tighten the screws (A).
the type of materials they contain and in compliance
with the laws in force concerning "waste collection, sort-
ing and disposal".
32
8
B
Use and maintenance