Checchi & Magli WOLF COMPACT Manuel D'utilisation Et D'entretien page 45

Size of seedlings with bare roots (3)
C
D
B
A
UN41 0075GF
(3) Bare root seedlings (nursery cuttings, peppers, onions, leeks, etc.);
the leaf apparatus must be not be well developed.
Optional accessories
The following chart shows the optional accessories available for installation.
Information about the accessories (fitting, use, etc.) is provided with the said accessories.
Manual lift row tracers (max. row spacing: 110 cm)
Manual lift row tracers (max. row spacing: 150 cm)
Inter-cup watering device
300 l tank for three rows (for models without manure spreader only)
300 l tank for four rows (for models without manure spreader only)
Sloping box holder
Plant box
Insert for 4x4 cm cubic root balls (standard cup)
Insert for 4x4 cm cubic root balls (5x5 cup and long cup)
Ø 70 mm extender insert for leafy plants (up to three cups and without watering device only)
Special cushioned seat
Fastwolf facilitator (for seedlings with conical and pyramid-shaped root balls - dispenser with 4, 5, 6 cups - min. 40 cm
row spacing)
Brush kit for external drilling cup cleaning
Hiller disk kit (Ø 410 mm)
Front flex compactor roller (Ø 250x200)
Standard drilling cup
Long drilling cup
5x5 drilling cup
7x7 drilling cup
Planting unit locking kit (raised WOLF COMPACT)
Microgranular fertiliser spreader (with linear dispensing function and mechanical transmission)
Manure spreader (with linear dispensing function and mechanical transmission)
Root ball separator with depth adjustment feature (not compatible with front flex compactor roller)
Drilling cups inserts
In the event of differences between the seedlings, suit-
able inserts can be placed in the drilling cups in order
to improve planting precision and to prevent damage to
the plant's leafy fronds.
Permitted gradients
The ground conditions (slippery, sloping, etc.) and the
type of tractor used can reduced the stability of the
English language
TECHNICAL INFORMATION
min. 1
A (cm)
max. 4
min. 5
B (cm)
max. 7
min. 8
C (cm)
max. 15
min. 13
D (cm)
max. 22
7
If necessary, contact the manufacturer to obtain the rela-
tive inserts.
tractor/work vehicle assembly and cause sudden, dan-
gerous movements, especially when the work vehicle is
lifted off the ground.
2
Use and maintenance