Adjustment Information - Checchi & Magli WOLF COMPACT Manuel D'utilisation Et D'entretien

Safety advice concerning adjustments
Maintenance and adjustment work must be carried
out with the work vehicle on flat, compact ground,
Adjusting the packing wheels
A
UN41 0127LF
The packing wheels (A) are used to ridge and compact
the soil around the planted seedlings.
Their arrangement (spacing and tilt) determines the way
the soil accumulates around the seedlings and the effec-
tiveness of the packing.
Adjust the packing wheel (A) distance and tilt as required
according to the principles outlined below.
a) The more the wheels are tilted, the more soil accu-
mulates around the seedlings.
b) The less the wheels are tilted, the less soil accumu-
lates around the seedlings.
c) The farther the wheels are, the less efficient the pack-
ing is.
d) The closer the wheels are, the more efficient the
packing is.
English language

ADJUSTMENT INFORMATION

with the tractor engine off, parking brake engaged,
ignition key removed, and adopting all the necessary
safety measures required to work safely.
A
To tilt the wheels, proceed as outlined below.
1) Lift the packing wheels off the ground.
2) Loosen the screws (B) and (D) on each packing
wheel.
3) Tilt the wheels as required for the purposes of the job
in hand.
4) Tighten the screws (B) and (D) on each packing
wheel.
5) Lower the wheels onto the ground.
To move the wheels apart, proceed as outlined below.
1) Lift the packing wheels off the ground.
2) Loosen the screws (C) and (D) on each packing
wheel.
3) Widen the wheels as required for the purposes of the
job in hand.
4) Tighten the screws (C) and (D) on each packing
wheel.
5) Lower the wheels onto the ground.
15
5
Use and maintenance