Checchi & Magli WOLF COMPACT Manuel D'utilisation Et D'entretien page 52

Installing the plastic mulch pressing skids
These skids only need to be fitted if you are laying plastic
mulch sheets and their task is to keep the sheets fitted
tightly against the ground when the drilling cup moves
in and out of the soil.
A
B
UN41 0470BM
Proceed as outlined below.
1) Lift the work vehicle off the ground.
2) Position the plastic mulch pressing skid (A).
Align the fastening holes in the plastic mulch press-
ing skid with the holes in the protective casing in
order to mount the skid in the lowest position.
3) Tighten the screws (B).
4) Unscrew the screw (C) and remove the washer (D).
5) Remove the spacer (E).
English language
SAFETY INFORMATION CONCERNING HANDLING AND
INSTALLATION
14
Danger - Warning
Secure the work vehicle in position (lifted off the
ground) with external means (trestles, etc.).
Do not stand under the hoisted machine unless it is
suitably secured in position.
E D C
6) Fit the tensioning unit (F) in position.
7) Fit the new bushing (G) provided with the skid.
8) Position the washer (D) and tighten the screw (H)
provided with the skid.
9) Attach the spring to the plastic mulch pressing
skid.
10) Adjust the pressure that the plastic mulch pressing
skid has to apply to the plastic mulch (see "Adjust-
ing the plastic mulch pressing skid").
11) Lower the work vehicle onto the ground.
4
F
G D H
Use and maintenance