Bosch Rexroth 3 842 546 991 Mode D'emploi page 96

44/52 Maintenance

Regularly check the
tightening torque of
the screws holding the
mounting plate every
6 months.
Bosch Rexroth AG, MPS, 3 842 358 709/2016-07
10.1.1 Check the tightening torque of the screws
Fig. 24: Tightening torque of the screws holding the mounting plate
10.1.2 Lubricate the drive spindle
Uncontrolled lifting movement!
Lubricating the drive spindle when the case lifter has not been secured can lead to
serious injuries.

Only lubricate the drive spindle when the mains plug has been pulled out.

Make sure the unit is secured against being switched on again during this period
(pull out the mains plug and secure against reinsertion).
(4x)
SW6
M =22 Nm
D
WARNING
358 709-09