Safety Warnings; Important Safety Instructions - Makita UR101C Manuel D'instruction

ENGLISH (Original instructions)
SPECIFICATIONS
Model:
Handle type
No load speed
(at each rotation speed level)
Overall length
(without cutting tool)
Nylon cord diameter
Applicable cutting tool and
cutting diameter
Rated voltage
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2014
Applicable portable power pack
PDC01

SAFETY WARNINGS

Important safety instructions

WARNING:
Be sure to thoroughly read and under-
stand this instruction manual as well as the instruction
manual of the portable power pack to be used with this
tool. Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
WARNING:
When using electric gardening
appliances, basic safety precautions should always
be followed to reduce the risk of fire, electric shock,
and personal injury, including the following.
Read All Instructions
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
SAVE THESE INSTRUCTIONS.
General instructions
1. Never allow people unfamiliar with these instruc-
tions or children to use the machine. Local reg-
ulations can restrict the age of the operator. It is
dangerous in the hands of untrained users or children.
Be sure that anyone who is to operate the tool
2.
has first read the instruction manual.
2-tooth blade
(P/N 198345-9)
3-tooth blade
(P/N 195299-1)
4-tooth blade
(P/N 195150-5)
(P/N 196895-8)
Nylon cutting head
(P/N 198893-8)
UR101C
Bike handle
1,760 mm (69-1/4")
2.0 - 2.3 mm (0.08" - 0.09")
D.C. 36 V - 40 V max
5.2 kg (11.5 lbs)
3. Use the tool with the utmost care and attention.
Operate the tool only if you are in good physical
4.
condition. Perform all work calmly and carefully.
Use common sense and keep in mind that the oper-
ator or user is responsible for accidents or hazards
occurring to other people or their property.
5. Never operate the tool when tired, feeling ill or
under the influence of alcohol or drugs.
Avoid accidentally starting:
6.
— Ensure the switch is in the off position
before connecting the portable power
pack. Connecting the portable power pack to
the tool with the switch on invites accidents.
Carrying the tool with your finger on the
—
switch invites accidents.
7. The tool should be switched off immediately if
it shows any signs of abnormal operation.
8. Don't force the tool. It will do the job better and
with less likelihood of a risk of injury at the rate for
which it was designed.
9. Don't overreach. Keep proper footing and
balance at all times.
10. Stay Alert - Watch what you are doing. Use common
sense. Do not operate appliance when you are tired.
Store idle appliances indoors.
11.
12. Keep fingers away from switch trigger when
not operating the tool and when moving from
one operating position to another.
2 ENGLISH
UR201C
Loop handle
3: 0 - 7,000 /min
2: 0 - 5,500 /min
1: 0 - 4,600 /min
1,795 mm (70-1/2")
255 mm (10")
255 mm (10")
230 mm (9")
255 mm (10")
430 mm (17")
4.7 kg (10.4 lbs)