WIKA GA11 Mode D'emploi page 9

3. Safety
Permissible insulating gases and gas mixtures for g³-Q-Analyser
g³ gas
■
CO₂
■
3M™ Novec™ 4710
■
Application areas
The instrument is especially designed for applications that fulfil the following conditions:
The use is only allowed in buildings or dry surroundings.
■
The transport case must always remain horizontal during commissioning and in use.
■
Use only for commercial purposes and in industrial environment.
■
The height of the operation site should not exceed 2,500 m.
■
Environment with max. pollution degree of 3.
■
Voltage supply of overvoltage category II.
■
Ambient temperature between 0 ... 40 °C [32 ... 104 °F].
■
Only use the analytic instrument in applications that lie within its technical performance
limits (e.g. max. ambient temperature, pressure ranges, ...).
→ For performance limits see chapter 12 "Specifications".
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly.
Only use the instrument with original accessories from WIKA.
Refrain from unauthorised modifications to the instrument.
Any use beyond or different to the intended use is considered as improper use.
The technical specifications contained in these operating instructions must be
observed. Improper handling or operation of the instrument outside of its technical
specifications requires the instrument to be taken out of service immediately and
inspected by an authorised WIKA service engineer.
Handle electronic precision measuring instruments with the required care (protect from
humidity, impacts, strong magnetic fields, static electricity and extreme temperatures,
do not insert any objects into the instrument or its openings). Plugs and sockets must be
protected from contamination.
The manufacturer shall not be liable for claims of any type based on operation contrary
to the intended use.
WIKA operating instructions analytic instrument, model GA11
EN
9