Automatic And Cyclic Recalibration Of The Humidity Sensor; Cancelling An Ongoing Measurement - WIKA GA11 Mode D'emploi

5. Commissioning, operation

5.5 Automatic and cyclic recalibration of the humidity sensor

In order to ensure that the humidity sensor only has a short settling time, even after
the measuring instrument has been stored for a longer period of time, the instrument
automatically recalibrates the humidity sensor module at start-up and at regular
intervals. If this recalibration takes place during a measurement, the measurement is
paused until the recalibration is completed.
If the measuring instrument has experienced large temperature differences
or if very dry gas is to be measured, the instrument must be switched on at
least 1 hour before the measurement.

5.6 Cancelling an ongoing measurement

1. Press "Cancel" and confirm by pressing "Yes".
WIKA operating instructions analytic instrument, model GA11
EN
19