Saving The Measuring Result - WIKA GA11 Mode D'emploi

5. Commissioning, operation
2. Select the gas compartment for pumping the measuring gas back (only available
when the "pumping back" function is selected).
⇒
Measuring gas is pumped back
⇒
Measurement is finished.
Connection 
The measuring gas is directly pumped back into the measured gas compartment.
Connection 
The measuring gas is pumped into a pressurised external gas compartment (e.g. gas cylinder).
The maximal pumping capacity of the analytic instrument is:
10 bar abs. (SF₆-Q-Analyser)
■
12 bar abs. (g³-Q-Analyser)
■
External container 
With the function activated, the measuring gas is emptied from an external container at
connection  as well.

5.8 Saving the measuring result

The easiest way is to use the name allocation in advance on a PC. You can create a
name list (separated by commas) and load it into the analytic instrument via the USB
interface (→ see chapter 6.5 "Importing/exporting the list of measurement names via
USB interface").
Do not use USB extension cables when connecting the USB memory stick!
WIKA operating instructions analytic instrument, model GA11
EN
21