Settings; Calling The Settings Mode - WIKA GA11 Mode D'emploi

6. Settings

6. Settings

6.1 Calling the settings mode

The main menu "Settings" must be enabled before settings to the analytic instrument
can be made.
EN
6.2 Settings
Setting the units
1
Activated: The oldest data records will be deleted when the limit of 500 data records is reached.
2
Deactivated: There will be an error message "Memory is full" when the limit of 500 data records is reached
Importing/exporting the list of measurement names via USB interface
3
Calibration gas of SF
4
The calibration tables of the percentage sensor may only be changed if the
sensor is also calibrated for both matrix / carrier gases.
24
1 2
4 3
percentage sensor
6
WIKA operating instructions analytic instrument, model GA11
Measurement
Data
management
Settings