WIKA GA11 Mode D'emploi page 18

5. Commissioning, operation
3. Save or skip the measuring result.
EN
Measuring results are automatically compared with the defined limit values and an
OK symbol is displayed if they pass.
Defined limit values (→ see chapter 6.6 "Limit values for gases").
4. Select the gas compartment for pumping the measuring gas back (only available
when the "pumping back" function is selected).
⇒
Measuring gas is pumped back.
⇒
Measurement is finished.
Connection 
The measuring gas is directly pumped back into the measured gas compartment.
Connection 
The measuring gas is pumped into a pressurised external gas compartment (e.g. gas cylinder).
The maximal pumping capacity of the analytic instrument is:
10 bar abs. (SF₆-Q-Analyser)
■
12 bar abs. (g³-Q-Analyser)
■
External container 
With the function activated, the measuring gas is emptied from an external container at
connection  as well.
18 WIKA operating instructions analytic instrument, model GA11