Maintenance And Cleaning; Maintenance; Cleaning; Recalibration - WIKA GA11 Mode D'emploi

8. Maintenance and cleaning

8. Maintenance and cleaning
8.1

Maintenance

Repairs and maintenances must only be carried out by the manufacturer or
manufacturer-approved service partners.
EN
8.2

Cleaning

CAUTION!
■
■
■
■
For information on returning the instrument see chapter 11.2 "Return".
8.3

Recalibration

We recommend that the analytic instrument is regularly recalibrated by the manufac-
turer. In addition, every factory calibration includes a free-of-charge check of all system
parameters with respect to their compliance with the specification. The basic settings
will be corrected if necessary.
SF₆-Q-Analyser: 2 years
g³-Q-Analyser: 1 year
The time until the next recalibration for each individual sensor can be queried under
"Sensor info".
Settings > System > Sensor info
30
Clean the instrument with a moist cloth.
Electrical connections must not come into contact with moisture.
Wash or clean the dismounted instrument before returning it, in order to
protect persons and the environment from exposure to residual media.
Residual media in the dismounted instrument can result in a risk to
persons, the environment and equipment.
Take sufficient precautionary measures.
WIKA operating instructions analytic instrument, model GA11