Publicité
Control surface travels for aerobatics
Ailerons adjustable
Rudder adjustable
Elevator adjustable
Landing flaps adjustable
Important:
When fitting and adjusting the various linkages you should ensure that they move
freely, without binding, are able to move to their full extent - including trim travel - and
are not obstructed mechanically at any point. Pull the elevator stick back towards
you, and the elevator must deflect up (stick forward: elevator down). If you move the
aileron stick to the right, the right aileron should rise, the left aileron fall. Move the
rudder stick to the right, and the rudder should deflect to the right (left-stick = left
rudder). When you move the throttle stick forward, the motor should run at full power.
With the throttle stick and trim fully back (towards you), the motor must stop reliably.
All that remains is to wish you many hours of pleasure flying your SMARAGD.
Yours - the Graupner team
GRAUPNER GmbH & Co. KG D-73230 KIRCHHEIM/TECK GERMANY
Änderungen vorbehalten! Keine Haftung für Druckfehler Id-Nr. 0059157
16 mm upwards and 7 mm downwards
30 mm to left and right
8 mm upwards and 6 mm downwards
22 mm upwards
43
04/2008
Publicité
