The lamp must never be ignited if the objective-lens or any housing-cover is open, as discharge lamps may
explose and emit a high ultraviolet radiation, which may cause burns.
The maximum ambient temperature T
Operate the device only after having become familiarized with its functions. Do not permit operation by
persons not qualified for operating the device. Most damages are the result of unprofessional operation!
Please use the original packaging if the device is to be transported.
Please consider that unauthorized modifications on the device are forbidden due to safety reasons!
Never remove the serial barcode from the device as this would make the guarantee void.
If this device will be operated in any way different to the one described in this manual, the product may suffer
damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like short-
circuit, burns, electric shock, lamp explosion, crash etc.
DESCRIPTION OF THE DEVICE
Features
Innovative Moving Multi Lens Spot
• High-quality die-cast housing for highest stability
• With colour-filter frame
• Safety grille (splinter protection) is integrated in the filter frame
• Mechanical shutter
• Exact positioning via 16 bit Pan/Tilt movement resolution
• Pan-movement range 530°
• Tilt-movement range 280°
• Automatic Pan/Tilt position correction
• Built-in demo sequences
• DMX-controlled operation or stand alone operation with Master/Slave-function
• Control-Board with 4-digit display for adjusting the DMX-starting address
• For CDMT 150 lamp - EUROLITE TMP-150
• For CERAMIC ST 250 HR GZY-9.5 lamp - EUROLITE TMP-250
• DMX-control via every standard DMX-controller
Overview
= 45° C must never be exceeded.
a
21/57
(1) Projector head
(2) Shutter/colour-filter frame
(3) Yoke
(4) Control LED
(5) Display
(6) Mode-button
(7) Enter-button
(8) Down-button
(9) Up-button
(10) Screws (colour-filter frame)
(11) Cover (colour-filter frame)
00021435.DOC, Version 1.1