Description Of The Device; Starting Operation - EuroLite Snow 6001 Mode D'emploi

DESCRIPTION OF THE DEVICE

Features
Powerful snowmachine
• A lot of "snowflakes" are thrown into the room up to a distance of 2 m
• Constant snowing creates a foam/snow build up, which dissolves gradually
• The dissolution of the "blanket of snow" happens nearly without residues
• Snow output is controlled via the control unit at the remote control
• Ideal for a "winter" subject in discos, theatres etc.
• With 2.5 l tank for permanent operation
• Suitable snowfluid: EUROLITE Snowfluid
• DMX512 control via regular DMX controller (occupies 1 channel)
• With bracket for suspended mounting
• High quality structure
• High quality at a low price
Overview
(1) Power switch
(2) Volume switch
(3) Power supply
(4) Fuseholder
(5) Remote control socket
(6) DMX input and output socket
(7) DIP switches

STARTING OPERATION

Install the device on a plane surface.
The liquid tank of the device needs to be filled with snow fluid before starting up operation and always
disconnected from the mains as fluid could be spilled.
Only use quality snow fluids available at your dealer. We recommend high-quality Eurolite snow fluids (e. g.
EUROLITE Snow Fluid, 5 l). You must not use substances that are classified as "dangerous working
material" or "inflammable fluids".
If fluid should get into the interior of the device, disconnect from mains immediately and consult a technician.
Caution! Ensure a minimum distance between snow machine and audience of min. 2 m. Never direct the
snow output nozzle to the face or the eyes of people.
13/29 00035972.DOC, Version 1.1