Piece Counting Mode; Parameter Configuration - Baxtran BR16 Mode D'emploi

7. PIECE COUNTING MODE

1. Press the key
2. Press the key
C50/C100/C200.
3. Place the sample on the platform, and wait until the sign of stability and press the key
4. Place the product on the platform and the screen will show the number of pieces.
The accumulation and the sending of data will depend on the mode chosen in the section UF-6.
• To turn to the normal weighing mode, press the key
• If the user wants to go back to the piece counting mode, using the same sample of reference, press the key
• If the user want to change the sample of reference, the user must repeat the steps described above.
8. PARAMETERS CONFIGURATION
8.1 INTERNAL COUNTING (A/D)
8.2 CONFIGURATION OF THE WEIGHT LIMITS (SUPERIOR AND INFERIOR)
8.3 AUTO SWITCH OFF
8.4 CONFIGURATION OF THE ILLUMINATION OF THE DISPLAY
8.5 HOLD FUNCTION
8.6 RS-232 DATA EXIT
8.7 CONFIGURATION OF THE SPEED OF THE AD CONVERTER
8.8 BLIND
8.9 CONFIGURATION OF THE GRAVITY
To access the configuration of parameters when the screen is in zero, the user must press at the same time the keys
Press the key or
To go back to the previous mode press the key
8.1 INTERNAL COUNTING (A/D) |
1. Press the key to view the internal sums of the scale.
2. To go to the next parameter, press the key
3. To exit this mode and go back to the normal weighing, the user must press the key
8.2 CONFIGURATION OF THE LIMITS OF WEIGHT ( SUPERIOR AND INGERIOR) |
1. Press the key
2. The display will show the message " 000.00L " ( inferior limit)
3. Use the keys
4. Press the key
54
until the symbol PCS appears on the screen
successively to choose the quantity of pieces of the sample. On the screen will appear, successively, C10/C20/
to choose the desired character (UF-1 ~ UF-11).
UF-1
the screen will show the value of the voltage of the battery.
to access the parameter.
and to move the cursor and the key
to confirm.
.
to choose the desired number..
USER'S MANUAL BR16
.
again.
UF-1
UF-2
UF-3
UF-4
UF-5
UF-6
UF-7
UF-8
UF-9
or
EN
and .
UF-2