Baxtran BR16 Mode D'emploi page 61

• With the visor switched off, press and hold the key
LF 1 screen, then you can release the key
• With the keys
• Press the key
automatically.
CALIBRATION OF THE WEIGHT
DISPLAY
LF 1
mum capacity and it must also never be exceeded.
CAL Z
•Press the key
the menu LF1)
150.00 kg
•Use
calibration will be done. ( press the key
•Place the required weight on the scale as it is indicated in the display.
150.00 kg
150.00 kg
•Once everything is steady, press the key
and go back to the menu LF1).
THE CALIBRATION IS GOING TO FINISH AND THE SCALE WILL GO VACK TO THE WEIGHING MODE AUTOMATICALLY.
CONFIGURATION
LF 2
DISPLAY
FIRST STEP
262144
•DISPLAY OF THE INTERNAL COUNTING
•POSSIBLE VALUES OF THE PARAMETERS
SECOND STEP
A: Metric system
B: American system
C: other unities
1 0 0 0 0 1
D: PCS
A B C D E F
E: double range
F: units of calibration
THIRD STEP
•Use
considering the number of decimal zeros to be used. Ex. 150.00kg = introduce 15000 if then selected
000000kg
as decimal
, and
to start or the key
LF 1
DESCRIPTION AND SEQUENCE OF USE
The calibration can be done with any weight, but the weight ca not be inferior to 1/100 of the maxi-
to start the calibration of zero ( press
0 ~ 9
, and ,
DESCRIPTION AND SEQUENCE OF USE
0:NO
0:NO
0:NO
0:OFF
0:OFF
lb oz cannot be selected as unities of calibration.
The scale won't let us continue up to the next step if there is a mistake during the programming.
0 ~ 9
, and ,
d0.00
until the message
.
0020
introduce the code .
to exit the menu and the indicator will begin again
To exit the calibration and go back to
and then press to introduce the weight with which the
to exit the calibration and go back to the menu LF1)
to calibrate it ( press the key ESC to exit the calibration
1: kg 2:T
1: lb 2:lb oz
1: TW kg 2:HK kg
1: ON
1: multi interval 2:multi range
1:use metric
2:use american unities
unities
and then press to introduce THE MAXIMUM CAPACITY,
USER'S MANUAL BR16
P000
, appears on the
3:g
3:VISS
EN
61