Baxtran BR16 Mode D'emploi page 62

FOURTH STEP
dP 0.0
FIFTH STEP
diV 01
LF 2
262144
100001
000000kg
d 0.0kg
div 01
LF2
SPEED OF THE AD CONVERTER
SPEED 1 standard speed 15Hz.
SPEED 2 high speed 30Hz.
SPEED 3 low speed 7.5Hz
*This function stays blocked when UF-5 is in mode HOLD 1.
*The value of factory is 1
DISPLAY
62
•Use the Keys , to change the position of the DECIMAL POINT.
d 0.00 d 0.000
•Use to select the DIVISION:
diV 01, diV 02, diV 05, diV10, diV 20, diV 50
After introducing the parameters LF2, the indicator will show the last configuration saved. All the
steps to follow must be completed, if they are not done the indicator will continue with the previous
configuration.
Proceed with the calibration of weight after LF2.
•Press the key to start and display the internal value. Press
will automatically restart.
•Press the key To continue with the configuration. (press the key
ration and go back to the menu LF2).
•Use the keys ,
OF WEIGHT . (press the key
•Use the keys ,
MUM WEIGHT. press the key
•Use the keys , and Then
from the configuration and go back to the menu LF2).
•Use and then to change the step. (Press the key
go back to the menu LF2).
•Use , and then
exit from the menu and the scale will begin again automatically).
LF 4
d 0.0000
0 ~ 9
and , and then press the key
to exit from the configuration and go back to the menu LF2).
0 ~ 9
and , and then press the key
to exit from the configuration and go back to the menu LF2).
To move the decimal point ( press the key
To continue with the other configuration or press the key
DESCRIPTION AND SEQUENCE OF USE
USER'S MANUAL BR16
0.00000
to exit the menu and the scale
to exit from the configu-
to choose the UNITS
to choose the MAXI-
To exit
To exit from the configuration and
EN
to