Operation; Weighing Mode; Counting Mode; Percentage Mode - Baxtran BOW-P Manuel D'utilisation

5. OPERATION

5.1 WEIGHING MODE

UNIT SELECT: Press
TARE: Place the items on the scale plate which need to tared. Press
turns on. At this point, remove the item has been tared from the scale plate, the 'WEIGHT' window displays a negative weight. Press
key again, the 'WEIGHT' window displays '0',and the 'TARE' indicator turns off.
If there is a zero shift phenomenon, that is, there is nothing on the scale plate, but there will be a weight display in the 'WEIGHT' window.
You can set the Weight to Zero by press
This function is not available in the tare mode.

5.2 COUNTING MODE

In weighing Mode, press
In counting mode, press
key, screen will display '10,20,50,100,200,500,1000'.The sampling number in turn. Press
After selecting the number of samples, the 'WEIGHT' window displays 'LOAD-C'. Put the same number of samples on the scale plate, and
press key to complete the sampling.
In Counting mode, press

5.3 PERCENTAGE MODE

In weighing mode, press
In percentage mode, the indicators of 'KG','LB','PCS' are turned off.
Press key and the 'WEIGHT' window displays 'LOAD-P'. There are two ways to sample the weight:
(1) Put a sample equal to 100% on the scale, press
(2) By pressing the
and set the next Number.
When the weight of the sample is less than 0.1% of the maximum capacity of the scale, the 'WEIGHT' window displays '-CSL-', which
means the sample is insufficient and needs to be sampled again. Press
When percentage sampling is completed, the 'WEIGHT' window displays the current weight as a percentage of the sample weight, accurate
to 0.1%.
Under percentage mode, press
10
In counting and percentage mode is used for sampling.
Number input key, used to input numbers or select numbers.
Select Function mode. You can select weighing, counting or percentage mode.
key to select the weighing unit of kg/g or lb. The corresponding indicator will appear in the display.
key. (Zeroing range: ≤ 4%FS,For example, a 300 kg scale can only be zeroed ≤12 kg weight).
key to enter the counting mode.
key to start weight sampling, the 'WEIGHT' window displays 'SAPX', X is the number of samples. Press
key to exit.
key twice to enter Percentage mode.
key, the 'WEIGHT' window displays '000000'. Press
key to exit.
key, the 'WEIGHT' window displays 0 and the 'TARE' indicator
key to complete the sampling.
key to adjust the number, press
key to re-sample.
BOW-P USER MANUAL
key to confirm the sampling number.
key to confirm
EN EN