Troubleshooting - Scheppach TIGER 2000S Traduction Des Instructions D'origine

15. Troubleshooting

Problem Possible cause
Engine, cable or connector defective,
Engine does not run.
fuses burnt.
The engine starts
slowly and does not Voltage too low, coils damaged,
reach the operating capacitor burnt.
speed.
Engine producing
Coils damaged, motor defective.
excessive noise.
Engine does not Circuits in the network are overloaded
reach full power. (lamps, other engines, etc.)
Motor overheats Overloading of the engine, insufficient
easily. cooling of the engine.
20 GB/IE
Remedy
Have the machine checked by a specialist. Never repair the engine
yourself. Attention! Check the fuses and replace them if necessary.
Have the power supply company check the voltage. Have the engine
checked by a specialist. Have the capacitor replaced by a specialist.
Have the engine checked by a specialist.
Do not use any other devices or engines on the same circuit.
Avoid overloading the engine during grinding and remove dust from the
engine to ensure optimum engine cooling.