Breville the Smart Scoop BCI600XL Livret D'instructions page 24

PAGE HEAdER..... CARE & CLEANING
Ensure that the ice cream machine is
turned off by pressing the POWER button.
The ice cream machine is off when the
'START | PAUSE' button 's LCD light is
no longer illuminating red. Remove the
power plug from the power outlet. Allow
the ice cream machine compressor to cool
completely before disassembling and
cleaning.
CLEANING THE STAINLESS
STEEL HOUSING
1. Wipe the exterior of the stainless steel
housing and the LCD screen with a
soft damp cloth. A non-abrasive liquid
cleanser or mild spray solution may be
used to avoid build up of stains. Apply
the cleanser to the sponge, not the outer
surface or LCD screen, before cleaning.
Do not use a dry paper towel or cloth to
clean the LCD screen, or use an abrasive
cleanser or metal scouring pad to clean
any part of the ice cream machine as
these will scratch the surface.
NOTE
Never immerse the stainless steel
housing in water or place in the
dishwasher. Take care not to allow
water or cleaning fluids to seep under
the buttons or LCD screen on the
control panel.
2. If over-spill of cream, milk, chocolate etc.
occurs in the interior chamber, carefully
remove them using a soft, damp cloth.
3. Let all surfaces dry thoroughly prior
to inserting the power plug into a
power outlet.
24
BCI600XL_IB_B11_FA.indd 24
CLEANING THE LId
The lid can be cleaned in warm soapy water,
using a soft sponge. Do not use an abrasive
cleanser or metal scouring pad as these
will scratch the surface. Let all surfaces dry
thoroughly prior to placing into the ice
cream machine.
CLEANING THE ICE CREAM BOWL
1. Fill the ice cream bowl up half way with
warm soapy water. A non-abrasive liquid
cleanser or mild spray solution may be
used. Allow to stand for 10-20 minutes.
NOTE
Ice Cream Bowl is NOT dishwasher
safe.
NOTE
To clean the ice cream chamber
ensure that the machine is at room
temperature. Wipe inside chamber
with a damp cloth and soapy water.
Once clean, dry thoroughly.
19/08/11 1:19 PM