Hilti PMA 31-G Mode D'emploi page 13

Masquer les pouces Voir aussi pour PMA 31-G:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 15
▶ Observe the temperature limits when storing your equipment. This is particularly important in summer or
winter if the equipment is kept inside a motor vehicle (-30°C to +60°C / -22°F to 140°F).
6 Transport and storage
6.1 Transport
▶ Use the Hilti shipping box or packaging of equivalent quality for transporting or shipping your equipment.
Note
The batteries must be insulated or removed from the tool before the tool is shipped or sent by mail.
6.2 Storage
▶ Remove the tool from its case if it has become wet.
▶ The tool, its carrying case and accessories should be cleaned and dried (at maximum 63 °C/145 °F).
▶ Repack the equipment only once it has dried completely and then store it in a dry place.
▶ Check the accuracy of the equipment before it is used after a long period of storage or transportation.
6.3 Transport and storage of cordless tools
Transport
CAUTION
Inadvertent starting during transport. Uncontrolled starting during transport may occur if the battery
is fitted, thereby resulting in damage to the tool.
▶ Always remove the battery before transporting the tool.
▶ Remove the battery.
▶ Transport the tool and batteries individually packaged.
▶ Never transport batteries in bulk form (loose, unprotected).
▶ Check the tool and batteries for damage before use after long periods of transport.
Storage
CAUTION
Inadvertent damage caused by defective battery. A leaking battery may damage the tool.
▶ Always remove the battery before storing the tool.
▶ Store the tool and batteries in a place that is as cool and dry as possible.
▶ Never store batteries in direct sunlight, on heating units or behind a window pane.
▶ Store the tool and batteries in a place where they cannot be accessed by children or unauthorized
persons.
▶ Check the tool and batteries for damage before use after long periods of storage.
7 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
▶ Disposal of electric tools or appliances together with household waste is not permissible.
8 Manufacturer's warranty
▶ Please contact your local Hilti representative if you have questions about the warranty conditions.
Printed: 02.05.2017 | Doc-Nr: PUB / 5343882 / 000 / 01
English
9

Publicité

Table des Matières
loading

Table des Matières