Publicité
Les langues disponibles
Les langues disponibles
ZTR - Zero Turn Radius
The following ZTR specifi cations are recommended. Review your Vehicle Operators Manual for your vehicle
specifi cations.
•
Minimum vehicle dry weight of 863 lbs AND
•
Minimum 48" mower deck AND
•
Must have ROPS (Rollover Protection System) AND
•
Vehicle tire pressure is at manufacturer's recommended settings AND
•
Do not exceed 120lb of material in hopper on ZTR's.
Keep the ROPS in the raised and locked position and use the seat belt when operating the vehicle with spreader.
How to Attach to ZTR's
If you are developing your own mount, follow these guidelines:
•
Spreader can be mounted to front of vehicle
•
Fabricate a mount bracket using a minimum of 2" x 11 gage square steel tubing that attaches spreader frame
to front ZTR caster wheel frame.
•
Use at least (4) 1/2" diameter bolts to mount spreader frame to square steel tubing.
•
Center spreader with Center Line of Vehicle. Do not offset to the Left or Right.
•
Do not mount spreader so that it blocks operators fi eld of vision for safe operation.
•
Fabricate mount to accommodate the following dimensions:
1008754 Rev. A
8
Publicité
