Spyker Spreaders S80-12010 Manuel De L'opérateur page 15

9. Adjust the position of the Plastic Spacer (52; See
Figure 6) that was assembled in Step 7 so that it
is resting against the Frame (39) and tighten the
fasteners that hold it in place.
Figure 6
39
52
10. Attach Grip (53) to Gate Actuator Extension (44, if
applicable) as shown in Figure 7.
Figure 7
11. Turn spreader over and place the Screen (2) into the
hopper.
44
53
15 1008754 Rev. A