Spyker Spreaders S80-12010 Manuel De L'opérateur page 5

Optional Cable Kit (Spyker Part #: KSP14-CAB1) is recommended to control rate gate from UTV driver seat.
Optional Hopper Extension Kit (Spyker Part #: 05-120-3600) is needed to increase hopper capacity to 4 cubic feet
(not to exceed a total of 220lbs).
Locate and
tighten tie
straps from
frame to bed
(both sides)
5.5"
Use UTV receiver
hitch for mount.
Do not
mount high
5
Center spreader
on UTV
22"
No front mount
1008754 Rev. A