Publicité
Les langues disponibles
Les langues disponibles
7. Plug in Battery Harness connector to the Variable
Speed Control (3).
Black
Red
Variable Speed
Control
Red
Black
Black
Red
Red
8. Route Battery Harness to battery, and use Cable
Ties (17) to properly secure to vehicle.
to route wires away from hot surfaces, gas tank fi ll
areas, or areas that could cause tripping hazard.
ZTR
SUGGESTION
Fasten with
UTV
SUGGESTION
Route Around
Seat
9. Connect the red positive (+) wire of battery harness
to positive (+) clamp bolt of battery. Install and
tighten nut completely, and slide red battery boot
onto positive battery cable post.
10. Connect black negative (-) battery harness to black
negative (-) of battery clamp bolt. Install and tighten
nut completely.
17
Mount Variable Speed
Control Here
Cable Ties
Mount
Variable
Speed
Control Here
Route Beneath
Bed
1008754 Rev. A
Be sure
Publicité
