Spyker Spreaders S80-12010 Manuel De L'opérateur page 14

7. Attach Plastic Spacer (52) to Gate Actuator Bracket
(43) using one #10-24 x 2-1/4" Bolt (51), two 1/4"
Washers (27), and a #10-24 Nylon Lock Nut (48) as
shown in Figure 4. Leave loose.
Figure 4
52
27
48
1008754 Rev. A
43
27
51
8. Pivot the Gate Actuator Bracket (43) in the direction
shown until the Rate Gate (18; See Figure 5) has
just closed but isn't pushing against the Dial Mount
(5).
Figure 5
5 18
Close
but not
touching
14
43
Pivot