KTM Power Parts SXS13125044 Mode D'emploi page 5

Scope of supply:
1x Performance cylinder head
1x O-ring 86x2

1x O-ring 62x2

1x O-ring 12x2

6x cylinder head screws M7x30
6x seal rings DIN7603 7.3x12x1
1x copper seal ring 6x10x1

1x collar screw M6x8 ISA

Not included in scope of delivery:
1x combustion chamber insert
1x O-ring 22x2.5

NOTE:
Information on the combustion chamber inserts available for
a wide variety of requirements can be obtained directly from
your authorized dealer, in the KTM PowerParts catalog, or on
our homepage (www.ktm.com).
Preliminary work:
- Clean the motorcycle, especially in the area around the
engine (see the Owner's Manual).
- Take off the seat (see the Owner's Manual).
- Remove the fuel tank (see the Owner's Manual).
- Drain the coolant (see the Owner's Manual).
Main work:
- Unplug the spark plug connector
- Remove the spark plug

- Loosen the hose clamp

- Detach the radiator hose.
- Remove the cylinder head hanger plate
- Remove the 6 original cylinder head screws
- Take off the original cylinder head.
- Remove all three original O-rings.
- Insert the O-rings and
,,
delivery in the grooves in the cylinder.
SXS13125051

0770086020
0770062020
0770012021
50330079000

0603070121

0603061001
0025060086

0770220025



included in the scope of


5