End alarm clock
− Press any button on the base station (except
to stop the alarm. After 24 hours, the alarm will be
triggered again.
Auto stop function
If you do not press a button, the alarm switches off
automatically after 2 minutes. After 24 hours, the alarm will
be triggered again.
Repeat alarm (snooze function)
− Press the
sounds.
The alarm signal stops according to the setting made
(default setting: 5 minutes). Then the device switches
back on and the alarm sounds again. This procedure
can be repeated multiple times.
− To exit snooze mode, press any button
(except
than 2 seconds.
Other functions
Display illumination
− Select the desired display brightness by repeatedly
pressing
− Press
approx. 15 seconds.
78
button once when the alarm signal
) or hold down
.
to maximally illuminate the display for
for more
WS 1917 weather station
)