Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Scanning a document into your e-mail program
1
Load the document you wish to scan
in the auto document feeder or on the
document glass:
• Auto Document Feeder: Adjust
the document guides to the width of
the document. Insert the document
face up into the feeder.
• Document glass: Place the original
face down on the glass with the top
edge against the document guide.
Make sure the center of the original
is aligned with the center mark on
the document guide.
2
If desired, adjust the resolution with
the RESOLUTION key and/or the
contrast with the LIGHT/DARK key,
or adjust the Scan Settings in the E-
Mail Key tab of the Control Panel.
3
Press the E-MAIL key.
• Your specified e-mail program
automatically starts. A new
message is opened with the
document as a file attachment. You
can now select a recipient and enter
a subject and/or message.
Scanning a Document to Your E-mail Program
RESOLUTION
or
LIGHT/DARK
97
Publicité
Chapitres
Table des Matières
