Sharp AJ-5030 Mode D'emploi page 71

♦ If you don't remember the name, go directly to Step 5.
♦ If a name wasn't stored for an auto-dial number, press 0. This will
cause numbers, not names, to appear when you scroll.
5
Press the right arrow key to scroll
until the name (or number) appears in
the display. (To scroll backwards,
press the left arrow key.)
• If no names have been stored that
begin with the entered letter, you
will scroll from the next name, in
alphabetical order, in the list. If no
names/numbers have been stored at
all, NO DATA will appear.
6
Press the START key. The document
will be automatically transmitted
once the connection is established.
Checking and canceling transmission jobs
To display information on transmission jobs currently waiting in
memory to be sent, follow the steps below. You can also cancel a job
with this procedure.
1
Press these keys:
• The display will show
ACTION STATUS and the number
of transmission jobs, and then
information on the first job.
Sending a Fax by Automatic Dialing
FUNCTION
START
1
1
69