Copying On Special Types Of Paper - Sharp AJ-5030 Mode D'emploi

Copying on Special Types of Paper

Copying on Special Types of Paper
The Color MFP can be used to make copies on coated paper, glossy/
photo paper, and transparency film.
♦ Make sure the sheet is loaded print side up (for a transparency,
make sure the rough side of the transparency is facing up).
♦ When copying on transparencies, remove each transparency as it is
printed to prevent smearing.
Paper type setting
When using a specialty paper, you must set the paper type before
making the copy. Press the PAPER TYPE key to select a paper type.
(The default setting is PLAIN.)
PAPER TYPE
Note: The paper type
setting remains in effect
until you change it.
50
You can load up to 10
sheets of coated paper,
glossy paper, or
transparency film in the
paper tray.
PAPER TYPE
PLAIN
PAPER TYPE
COATED
PAPER TYPE
GLOSSY
PAPER TYPE
TRANSPARENCY