Microlife BP B2 Easy Manuel page 3

Microlife BP B2 Easy
1 ON/OFF button
2 Display
3 Cuff Socket
4 Mains Adapter Socket
5 Battery Compartment
6 Cuff
7 Cuff Tube
8 Cuff Connector
Display
9 Systolic Value
AT Diastolic Value
AK Pulse Rate
AL Battery Display
AM Cuff Signal Indicator «Err 1»
AN Irregular Heartbeat (IHB) Symbol
AO Traffic Light Indicator
AP Stored Value
AQ Pulse Indicator
AR Cuff Fit Check
-A: Suboptimal Cuff Fit
-B: Arm Movement Indicator «Err 2»
-C: Cuff Pressure Check «Err 3»
Read the instructions carefully before using this device.
Type BF applied part
Keep dry
BP B2 Easy
Intended use:
This oscillometric blood pressure monitor is intended for measuring
non-invasive blood pressure in people aged 12 years or older.
It is clinically validated in patients with hypertension, hypotension,
diabetes, pregnancy, pre-eclampsia, atherosclerosis, end-stage
renal disease, obesity and the elderly.
Dear Customer,
This device was developed in collaboration with physicians and
clinical tests carried out prove its measurement accuracy to be of
a very high standard.*
If you have any questions, problems or want to order spare parts
please contact your local Microlife-Customer Service. Your dealer or
pharmacy will be able to give you the address of the Microlife dealer
in your country. Alternatively, visit the internet at www.microlife.com
where you will find a wealth of invaluable information on our products.
Stay healthy – Microlife AG!
* This device uses the same measuring technology as the award
winning «BP 3BTO-A» model tested according to the British and
Irish Hypertension Society (BIHS) protocol.
Table of Contents
1. Using the Device for the First Time
• Inserting the batteries
• Selecting the correct cuff
2. Checklist for Taking a Reliable Measurement
3. Taking a Blood Pressure Measurement
• Manual inflation
• How do I evaluate my blood pressure?
• Appearance of the Irregular Heartbeat (IHB) Symbol
4. Data Memory
5. Battery Indicator and Battery change
• Low battery
• Flat battery – replacement
• Which batteries and which procedure?
• Using rechargeable batteries
6. Using a Mains Adapter
7. Error Messages
EN
EN
1