Hendi 231807 Mode D'emploi page 11

Faults
Fault
Appliance does not work
Technical data
Supply voltage
Power consumption
Warranty
Any defect affecting the functionality of the appliance that becomes apparent within one
year after purchase will be corrected by free repair or replacement provided the appliance
has been used and maintained in accordance with the instructions and has not been
abused or misused in any way. Your statutory rights are not affected. If the appliance is
claimed under warranty, state where and when it was bought and include proof of
purchase (f.e. receipt).
In line with our policy of continuous product development we reserve the right to change
the product, packaging and documentation specifications without notice.
Discard & Environment
At the end of the life of the appliance, please dispose of the appliance according to
the regulations and guidelines applicable at the time.
Throw packing materials like plastic and boxes in the appropriate containers.
Possible cause
No power at the electrical outlet.
The plug is not plugged (correctly)
into the electrical outlet.
The lever or the housing are not
closed proper. The safety
mechanism makes sure the
appliance does not work
Motor overheated
In case of any doubt, always contact your supplier!
230 V a.c./50 Hz
550 W
Possible solution
Check the fuse
Check the plug
Check if both the lever and the
housing are closed properly
Cool down the appliance for 3/4
hours