Fluval Vista 8.5 Mode D'emploi page 3

• If the aquarium is placed on a cabinet, it should be placed directly on the cabinet without any
additional support or damper in between. NEVER insert lining between the cabinet and the
aquarium. Use a level to ensure that the aquarium is perfectly level on the cabinet.
DECORATING AND ADDING WATER
• Rinse gravel (sold separately) and ornaments (sold separately) to remove any debris
before adding to your aquarium.
• Carefully add and distribute gravel in the aquarium avoiding the walls.
• Decorate with plants, rocks and other ornaments (sold separately).
• Fill the aquarium with room temperature water.
• Add correct doses of water conditioner and biological aquarium supplement
(sold separately).
LED STRIP LIGHT
• Connect the power cord of the canopy/LED light module to the transformer, and then plug
transformer into the electrical outlet. Make sure to create a "drip loop" for safety.
• Set LED lighting modes using touch switch on top of the canopy to shift between Bright Daytime
White and Deep Blue Nighttime positions.
ADDING THE FILTER
• This aquarium kit includes an internal filter. The aquarium filter is generally installed at the rear of
the aquarium. Ensure the aquarium is unplugged before installing filter.
• Please read and observe all important notices and follow filter installation instructions included
with this appliance. Make sure to create a "drip loop" for safety. Note: if you wish to install a clip-on
filter/upgrade your filter, there is an optional "punch out" located on the rear of the canopy for clip-
on filter installation (clip-on filter sold separately).
IF ADDING A HEATER
• Ensure the aquarium is unplugged before installing heater.
• Please read and observe all important notices and follow heater installation instructions included
with this appliance. Make sure to create a "drip loop" for safety.
2 – INTRODUCING FISH
Do not add fish immediately.
• Wait 3-4 days before introducing fish so that the water temperature has a chance to stabilize. Let
the pet store personnel guide you in your fish choice.
• Acclimatize fish before introducing them into the aquarium. Simply float the bag containing the
fish in the aquarium for 20 minutes to regulate water temperature in the bag and reduce the risk of
stressing your fish. It is not recommended to pour the water from the bag into your aquarium.
• Once all gravel, décor and inhabitants have been added, top up the aquarium with water leaving at
least 2.5 cm (1") from the top of the tank.
ATTENTION: Do not move the aquarium once it is full of water.
FEEDING YOUR FISH: Once your fish have been introduced into the tank, avoid feeding them for 24
hours. Thereafter, it is essential that you DO NOT OVERFEED YOUR FISH. The standard rule of thumb
is to feed them only as much as they can completely consume in two minutes. Once a day.
3 - AQUARIUM CARE AND MAINTENANCE
WARNING: ALWAYS DISCONNECT APPLIANCES IN THE AQUARIUM FROM THE ELECTRICAL SUPPLY
BEFORE PLACING HANDS IN THE WATER, BEFORE PUTTING ON OR TAKING OFF PARTS, AND WHEN-
EVER THE FILTER AND/OR HEATER EQUIPMENT IS BEING INSTALLED, MAINTAINED OR HANDLED.
• DO NOT place hands, décor or introduce any inhabitants into the aquarium without removing at
least 25% of the water volume as the displacement will over flow the aquarium water, and may
cause damage to the unit or the support surface.
• DO NOT use or place anything that has come in contact with soap in the aquarium.
• UNPLUG power supply prior to cleaning the light or any other portion of the aquarium. Use both
hands when manipulating this appliance. Wipe exposed surfaces carefully with a damp cloth to
remove any dust or mineral deposits that may collect over time. Make sure all surfaces are dry
before re-connecting the canopy/light to the power source.
REGULAR MAINTENANCE
• On a daily basis, you should remove any visible debris or uneaten food, and ensure that the filter
is running smoothly.
• On a weekly basis, remove 10-20% of the water using a gravel cleaner to ensure cleanliness and
to reduce build up of unwanted nitrate and waste. Replace with tap water of similar temperature,
and treat with the correct doses of water conditioner and biological enhancer supplements. Note:
Never change more than 20% of the water at any given time.
REPLACING FILTER CARTRIDGE
For best results, replace cartridge every two (2) to four (4) weeks.
NOTE: It is important not to change all cartridges at the same time to ensure
proper biological filtration (if applicable).