Publicité
e
Problem
No image on the TV
Low battery symbol
appears on TV screen
Image is stretched or
distorted on a wide
screen TV
27
Troubleshotting Guide
TV or VCR is not set
to proper input
Batteries in the cycle are
weak or dead
Plug-and-play cord
is disconnected
Game cartridge is not fully
inserted into slot in cycle
Batteries in the cycle
are weak
TV aspect ratio set incorrectly This product is designed for
Cause
Solution
Press the channel down
button on the VCR or TV and
check for an INPUT channel
below channel 2.
Use the menu system on
your TV or VCR to find INPUT
or SOURCE. Change to
INPUT or SOURCE.
Refer to your TV's or VCR's
instruction manual.
Replace the batteries in the
cycle with four, new "D"
(LR20) alkaline batteries.
Make sure both ends of the
plug-and-play cords are fully
connected to the cycle and
your TV or VCR.
Remove the game cartridge
from the cycle slot. Replace the
cartridge into the slot and push
to be sure it is fully inserted.
Replace the batteries in the
cycle with four, new "D"
(LR20) alkaline batteries.
use with a 4:3 aspect ratio
(display setting) and you
should see black bars on the
sides of the image. For best
picture, do not use a 16:9
aspect ratio (stretched) wide
screen setting. For more
information on changing
this setting, refer to your
TV owner's manual.
TM
Publicité
