Using The Cd Player; Programming The Track Order; Programming A Single Disc Playlist - Pioneer X-MT2000 Mode D'emploi

CD
6
4 ¢
CD 1
1 2 3
CD 2
4 5 6
CD 3
7 8 9
PGM
10/0 >10
PLAY MODE
REMOTE CONTROL UNIT

Programming the track order

This feature lets you make a playlist of up to 32 tracks. In the All play mode tracks can be
from any of the CDs loaded in the changer; in Single mode, tracks are from the selected
disc only.
The track order can be any you choose, and you can put tracks in the playlist more than
once if you like. The playlist applies only to discs in the player. Once you eject a disc the
playlist is lost.

Programming a single disc playlist

1 Select CD.
Press (remote) or turn the
CD
2 Select SINGLE play mode.
Press to switch between
PLAY MODE
3 Press CD1/2/3 or CD SELECT 1/2/3 to select the disc you want,
then press 7 to stop playback.
4 Press PGM twice (remote only).
5 Select a track to add to the playlist.
Use the number buttons (remote only) to select a track.
• For track numbers 1 to 10, use the corresponding number button.
• Use the number buttons (remote only) to jump straight to that track number. For
track 10 use the 10/0 button; for tracks 11 and over, use the >10 button. For
example, press >10, 6 for track 16; or >10, >10, 4 for track 24.
6 Add more tracks to the playlist.
Repeat step 5 to add up to 32 tracks.
To start playback press 6.
7

5 Using the CD Player

selector (front panel) to switch to CD mode.
FUNCTION
and .
ALL SINGLE
19
En