Controls And Displays Front Panel - Pioneer X-MT2000 Mode D'emploi

3 Controls and Displays
12
En
Front panel
1
2
3
4
5
6
7
1 CD SELECT 1 / 2 / 3 – Use to select CDs, and start playback if there's a disc
loaded. Also switches the system on if it was in standby.
2 STANDBY / ON – Press to switch on or into standby.
3 BASS / TREBLE – Use to adjust the tone of the sound.
4 Fluorescent display
5 FUNCTION – Turn to select the source to listen to: CD, radio or an external
component.
6 Disc tray
7 PHONES socket – Plug in a pair of headphones for private listening.
8 Disc indicators – Indicate whether a disc is loaded in that disc tray (blinks while
loading; lights when loaded)
OPEN / CLOSE 0 – Use to open or close individual disc trays. Also switches the
9
system on if it was in standby.
10 1 / 4 / TUNING – – When using the CD player, use to scan backwards, or
skip back tracks. When using the radio, use for tuning and to select preset stations.
¡ / ¢ / TUNING + – When using the CD player, use to scan forwards, or skip
forward tracks. When using the radio, use for tuning and to select preset stations.
1 1 7 – Press to stop a CD playing. Also cancels auto scan tuning.
12 38 – Press to start or restart a CD playing, or pause a disc that's already playing. Also
switches the system on if it was in standby.
13 VOLUME – Turn to adjust the volume.
14 DISPLAY / CLOCK – Press to change the CD or station information shown in the
display. Also use to set/display the clock.
TIMER – Use to set the wake up.
ENTER (DEMO) – Use to save a radio station preset; set the clock or timer. Also
switches the demo on/off.
8
9
10
1 1
12
13
14