Using The Dock (X-Em21 Only); Compatible Ipod/Iphone Models; Enjoying Audio Through The Dock - Pioneer X-EM21 Mode D'emploi

06

Using the dock (X-EM21 only)

Chapter 6:
Using the dock
You can enjoy audio from iPod/iPhone through this system.
Note
• No audio output from the PHONES socket in this situation.
• When operating directly on iPod/iPhone, do hold the iPod/
iPhone with the other hand to prevent loose connection.
• iPod/iPhone will not play automatically when docked if the
source is not selected as [iPod].

Compatible iPod/iPhone models

This system supports the following iPod and iPhone models.
• iPhone 4S
• iPhone 4
• iPhone 3GS
• iPhone 3G
• iPod touch (1st, 2nd, 3rd, and 4th generations)
• iPod nano (3rd, 4th, 5th, and 6th generations)
• iPod classic
Some of the functions may be restricted for some models.
• This system has been developed and tested for the
software version of iPod/iPhone indicated on the website
of Pioneer.
(http://pioneer.jp/homeav/support/ios/na/)
(http://pioneer.jp/homeav/support/ios/eu/)
• Installing software versions other than the ones
indicated on the website of Pioneer to your iPod/iPhone
may result in incompatibility with this system.
16
En
(X-EM21 only)

Enjoying audio through the dock

Note
• The peak current through the dock connector is limited as
1 000 mA for iPod/iPhone. To avoid damage to your iPod/
iPhone and this system, securely load your iPod/iPhone as
indicated.
1 Press iPod on the remote control or INPUT
repeatedly on the main unit to switch the source
to [iPod].
2 Remove the terminal cover from the dock.
3 Connect your iPod/iPhone to the dock.
4 Play a track on your iPod/iPhone.
Buttons

DOCK MENU
/
/
Functions
Start, pause, or resume playback.
Access the playlist of iPod/iPhone.
Navigate through the playlist of iPod/
iPhone.
Skip to the previous/next track.
Press and hold to rewind or search
forward fast.