Monogram ZDP366NTSS Instructions D'installation page 8

PRODUCT DIMENSIONS AND CLEARANCES
48", 36" and 30" Range Models
Optional
Backsplash
Accessories
12" Min. to combustibles or 0"
to a non-combustible material
above the cooking surface **
0" Clearance
to a back or
side wall below
the cooking
surface
8
Design Information
10-1/2"
13/16"
12"
(36" models
only)
30-36"
1"
35-1/4"
to
36-3/4"
** A s defined in the National Fuel Gas Code (ANSI Z223.1/CSA B149.1, Current Edition). Clearances from
non-combustible materials are not part of the ANSI Z21.1/CSA 1.1 scope and are not certified by CSA.
Clearances less than 12" must be approved by local codes and/or the authority having jurisdiction.
WARNING
The 12" high stainless steel backsplash accessory must be
installed in combination with a custom non-combustible backsplash.
The finished backsplash must cover the entire back wall up to the bottom of a hood,
or when there is no hood, 48" to combustibles.
(12" high stainless steel backsplash accessory is only available for the 36" model)
29-3/8"
To Front Edge
28-1/2"
To Front of Door
31-1/8"
To Front of Handle
With Oven Door Open
7" Control Panel
Height
48-1/4"
31-2000667 Rev. 1