Disassembly & Cleaning - Weston 82-0250-W Mode D'emploi

DISASSEMBLY & CLEANING INSTRUCTIONS
w WARNING
before cleaning, disassembling or assembling. Do not
immerse cord, plug or Main Body in water or other liquid.
Before using the Tomato Strainer for the first
time, thoroughly clean all parts (including
accessories) as instructed below. DO NOT
immerse the Main Body in water or other
liquid.
1. Turn the Motor Unit off (
disconnect it from the power supply.
2. Remove the Hopper from the Head.
3. To remove the Head, press the Head
Release Button and turn the Head clockwise
(FIGURE A).
4. To remove the Head from the chute,
press back the two tabs to release the head
(FIGURE B).
5. Turn the Front Ring Nut counter-
clockwise to remove it from the Head.
6. Disassemble all the parts from the Head/
Screen Assembly.
7. NOTE: DO NOT immerse the Main Body
in water or other liquid. Clean the Main Body
with a damp cloth or towel then wipe dry.
Wash all parts that contact food in warm
soapy water. Rinse with clean water. Dry all
parts immediately.
NOTE: Only plastic parts of the Tomato
Strainer are top-rack dishwasher safe.
8. Coat the Screen and Head with a food-grade
silicone spray.
8
ELECTRICAL SHOCK HAZARD: Disconnect power
) and
Head Release
Button
FIGURE A
FIGURE B
Tabs