Siemens SITRANS P DS III Serie Notice De Service page 45

Construction for gauge pressure and absolute pressure (from the gauge pressure series)
Process connection
Electrical connection
Han 8D is identical to Han 8U.
1)
Construction for gauge pressure, with flush mounted diaphragm
Weight
Material
● Wetted parts material
Process connection
Seal diaphragm
● Non-wetted parts materials
Electronics housing
Mounting bracket
Process connection
Electrical connection
Han 8D is identical to Han 8U.
1)
DS III construction with PMC connection
Weight
Material
● Wetted parts material
Gasket (standard)
O-ring (minibolt)
SITRANS P, DS III series (7MF4.33.. 7MF4.34.. 7MF4.35..)
A5E03434626-02, 12/2012
● Connection pin G / B in accordance with DIN EN 837-1
1
2
● Female thread / -14 NPT
1
2
● Oval flange (PN 160 (MWP 2320 psi g)) with fastening screw thread:
– / -20 UNF in accordance with EN 61518
7
16
– M10 in accordance with DIN 19213
● Oval flange (PN 420 (MWP 2320 psi g)) with fastening screw thread:
– / -20 UNF in accordance with EN 61518
7
16
– M12 in accordance with DIN 19213
● Male thread M20 x 1.5 and
Cable inlet using the following screwed joints:
● Pg 13.5
● M20 x 1.5
● ½-14 NPT or Han 7D/Han 8D connector
● M12 connector
Approx 1.5 ... 13.5 kg (3.3 ... 30 lb) with aluminum enclosure
Stainless steel, mat. no. 1.4404/316L
Stainless steel, mat. no. 1.4404/316L
● Non-copper aluminum die casting GD-AlSi 12 or stainless steel precision
casting, mat. no. 1.4408
● Standard: Polyester-based paint
Option: 2 coats: Coat 1: epoxy-based; coat 2: polyurethane
● Stainless steel nameplate
Steel or stainless steel
● Flanges as per EN and ASME
● F&B and Pharma flange
● BioConnect/BioControl
● PMC style
Cable inlet using the following screwed joints:
● Pg 13.5
● M20x1.5
● ½-14 NPT
● Han 7D/Han 8D plug
● M12 connector
Approx. 1.5 kg (3.3 lb) for aluminum enclosure
PTFE flat gasket
● FPM (Viton)
● FFPM or NBR (optional)
/ -14 NPT
1
2
1)
1)
43